Nuclean - surface disinfection spray

NUCLEAN is a ready-to-use surface disinfection spray designed for medical, clinical and hospital environments. It is suitable for the cleaning and disinfection of non-immersible medical device surfaces, without rinsing (except for surfaces in contact with food).

The NUCLEAN spray combines cleaning and disinfecting action with fast drying and leaves no residue. Its hypoallergenic formulation makes it suitable for frequent use in healthcare settings.

Main features

• Ready-to-use spray
• For non-immersible medical device surfaces
• No rinsing required (except food-contact surfaces)
• Fast drying, streak-free
• Hypoallergenic formulation
• Complete disinfectant activity in 5 minutes

Packaging

• 500 ml spray bottle
• Can be used with non-woven wiping cloths (e.g. bionet wipes 40 × 38 cm, ref. 712)

Microbiological properties – NUCLEAN Spray

Bacteria

• EN 13727: active in 1 minute
• EN 1276: active in 5 minutes
• EN 13697: active in 5 minutes
• EN 14561: active in 5 minutes

Yeasts / Moulds

• EN 13624: active in 1 minute
• EN 1650: active in 5 minutes
• EN 13697: active in 5 minutes
• EN 14562: active in 5 minutes

Viruses

• EN 14476: Norovirus, HIV-1 – active in 30 seconds
• EN 14476: Hepatitis B, Herpes virus, Influenza A/H1N1 – active in 1 minute
• EN 14476: Hepatitis C, Rotavirus, Adenovirus – active in 5 minutes

Spores

• EN 13704: Clostridium difficile – active in 15 minutes
• NF T 72-281: Bacillus subtilis – active in 5 minutes

Directions for use – NUCLEAN Spray

1. Pre-impregnate a clean non-woven wipe with the solution.
2. Thoroughly clean the surface.
3. Leave to act for 5 minutes (15 minutes for Clostridium difficile).
4. Do not rinse, except for food-contact surfaces.
5. Use a new wipe for each piece of equipment.